FAQs - Frequently Asked Questions - BE-FUELSAVER (PINOX)


What is the durability of the product?
The company ensures the durability and functioning of the BE-FUELSAVER (PINOX) for 30 years beyond 2 years warranty for manufacturing defects.

How much fuel can I save?
Modern engines save between 5% and 20% fuel. In some cases, there is a saving of up to 36% possible. In all cases, the best performance is found when the driver is aware of the way of driving. It also depends on climatic factors, cargo volume, fuel quality, topography of the roads and traffic. The best result is achieved in flat terrain and with a constant speed.

The PINOX also works on alcohol engines?
This technology is still being developed by the manufacturer, so it is recommended to use only gasoline in "FLEX" cars, for thus is more economical than using alcohol.

How much is the reduction of exhaust gases?
The reduction in generation of gaseous pollutants, on average, occurs between 15% and 99%. This improvement also depends upon each engine and fuel quality used. The reduction may be even higher, using the clamp PINOX-ES in conjunction with the automotive optimizer BE-FUELSAVER (PINOX).

How long it takes to see the functionality of the BE-FUELSAVER (PINOX)?
After correct installation, the functionality of the product is immediate (after the first 20-30 km). With the correct use of the BE-FUELSAVER (PINOX), the engine will be clean and energized, reaching the height of its functionality, after consumption of 6 fuel tanks. In diesel engines the noise level tends to decrease after the installation of the product and the engine is more "round".

What can I do to prove the product features?
1. Fuel economy test
2. Opacity test - soot emissions in diesel cycle with an opacimeter
3. Gas emission test, CO, HC, NOx in the Otto cycle (gasoline) with a gas analyzer
4. Power and torque test with a Dynamometer

The BE-FUELSAVER (PINOX) can also be used on buses and trucks?
Yes, the product can be used in both, trucks and buses, including large ones, for which the company provides an extra-strong device: The BE-FUELSAVER-XXL (PINOX-XXL). The BE-FUELSAVER (PINOX) can be used in all combustion engines powered by gasoline or diesel: cars, motorcycles, tractors, buses, trucks, boats, agricultural machinery, earthmoving machines, stationary engines, lawn mowers, brush cutters, chainsaws, generators, etc.

The BE-FUELSAVER (PINOX) can be used for tuning (tuned cars)?
Yes, the product increases the torque and engine power. For cars above 200 hp we recommend at least the BE-FUELSAVER-XL (PINOX-XL). For motorcycles and sports cars recommended the PINOX-XL and PINOX-XXL.

How to measure the fuel economy of my vehicle?
1. First, make sure the correct installation of BE-FUELSAVER (PINOX) device.
2. Make sure you are driving in the same conditions as before the product installation, as if you
    change your driving style, fuel consumption automatically also changes.
3. Write down the consumption data before the test with the BE-FUELSAVER (PINOX).
4. Do not change your style of driving.
5. We recommend testing by checking the miles (km) driven and the liters of fuel used.
6. Do not change the weight of the vehicle as it influences in the fuel consumption.
7. In case of tests, no refuel at different gas stations because the quality may vary.

The installation of the BE-FUELSAVER (PINOX) can damage my vehicle?
No. The product is only an accessory that does not change the mechanical, hydraulic, electrical or electronic of the vehicle. The BE-FUELSAVER (PINOX) simply improves fuel combustion.

The gas emission values of my vehicle are too high and I cannot pass the inspections. The BE-FUELSAVER (PINOX) can help me?
Yes. The BE-FUELSAVER (PINOX) can reduce up to 99% the emission of gaseous pollutants from your vehicle, as long as the engine is in a good condition as, for example, it dont have technical problems like oil spills etc. You will see better results after using 6 fuel tanks.

Can I use 2 small devices BE-FUELSAVER-S (PINOX-S) rather than using a larger BE-FUELSAVER-M (PINOX-M)?
No. The function of the BE-FUELSAVER-M (PINOX-M) is higher than the functionality of the BE-FUELSAVER-S (PINOX-S), therefore always dominates the higher frequency. This also applies to other models. It is recommended to use the correct device in each case, as indicated in the "Products" section.

The product is approved by the car insurance companies?
The BE-FUELSAVER (PINOX) do not interfere with mechanical, hydraulic, electrical and electronic devices of the vehicles, nor alter the unique aspects, not allowing a negative assessment by the insurers. So it is not necessary to approve the BE-FUELSAVER (PINOX) by car insurance companies.

Its use may affect the vehicle warranty?
Because there is no change in mechanical, hydraulic, electrical, electronic of the vehicle,
the use of BE-FUELSAVER (PINOX) does not affect the vehicle warranty.

How long it needs up to the ROI (return of investment) of the BE-FUELSAVER (PINOX)?
The ROI (return of investment) varies depending on the mileage (km) driven. Normally it is between 2 and 6 months (or 10.000 - 20.000 km).

The BE-FUELSAVER (PINOX) need maintenance?
No. The BE-FUELSAVER (PINOX) requires no maintenance and never stops working.

I'm using the BE-FUELSAVER (PINOX), but I cannot see if the vehicle is saving fuel.
First check if the BE-FUELSAVER (PINOX) is installed correctly. He has to stay, fixed with cable ties, on the fuel line that feeds the injectors and the engine injection pump. On the proper installation, please read the corresponding item "Installation".

It is important to remember that the BE-FUELSAVER (PINOX) improves fuel burning and the engine gains up to 20% more torque and power. This "extra energy", the engine gains, can be used in the following ways:

1. This "extra energy" ensures your vehicle perform better, it is more powerful and can get faster to the destination. But, once the driver takes advantage of this "extra energy", he will have less fuel economy.

2. When not using this "extra energy" that the BE-FUELSAVER (PINOX) provides and step less on the accelerator, keeping the same speed like you did before the use of the BE-FUELSAVER (PINOX), so there will be more fuel economy.

As the engine has more torque the gears can be changed much earlier (for example, where before you used the fourth gear, can now be used to fifth gear) and thus fuel economy is even greater, since it is not necessary go in high revolutions (high RPM), as the engine will already have more torque at low rpm.




Use the BE-Fuelsaver (PINOX) and save fuel - save money - protect the environment and have a more powerful engine!